Qc specialist
Резюме 221554 · 20 мая 2018, 10:28
Имя | Koblan | Контакты | Доступны бесплатно после регистрации или входа |
Общая информация
| Город проживания | Атырау | Заработная плата | от 400 000 тнг. | График работы | Полный рабочий день / Сменный график / Подработка / Вахтовый метод работы |
Образование |
Высшее | Опыт работы | 9 лет 3 месяца | Пол | Мужской | Возраст | 38 лет (28 апреля 1986) |
Опыт работы
|
Период работы | февраль 2015 — по настоящее время (9 лет 10 месяцев) |
Должность | QC and Construction Representative | Компания | TCOFircroft | Обязанности | Monitor quality of construction work performed by Contractor and ensures adherence to project specifications, codes, and AFC drawings;
Review materials take-off identified in engineering job pack and raise any additional requirements with project engineer.
Review job packs to ensure constructability of the work;
Review material takeoffs to ensure all materials required for the job are available prior to start of the work;
Interface with the appropriate departments within TCO to obtain work permits;
Interface with appropriate Project Engineer (s) on technical issues to ensure project objectives are met;
Capable of reading and understanding engineering drawings
Control quantity of Contractor equipment and personnel qualification assigned to reimbursable jobs to maximize work execution efficiency and minimize overall cost;
Participate in final job reviews with Operations
Compile necessary project closeout information;
Review Contractors’ time tickets and invoices for accuracy; Participate in NEAR MISS and SAFETY OBSERVATION programs. |
|
Период работы | май 2013 — февраль 2015 (1 год 10 месяцев) |
Должность | QAQC Engineer | Компания | TCOFircroft | Обязанности | Working with documentation approved for construction, develops indices of check sheets and acts required for technical and quality control
Quality check document correctness (Pr. No, Doc. No, DWG. No, revision, formatting etc) & make soft copy of each document
File latest revision of all project documents (hard copies) in accordance with the Project file index.
Working with the Live Tracking Database (inputting all AFC JPs with corresponding checklists and acts, updating project database, generation of different kinds of reports to track QC work process)
Compiling Indexes for Job Pack (on basis of design drawings)
Prepares facility documentation for Technical and Working Commissions.
Carry out Site Surveillance of Contractors Work Quality as identified on ITPs.
Working with TCO Specification and RoK Standards/Rules
Label all project files
Provide technical assistance to Designer, Construction, Commissioning and RA groups
Print, plot, scan drawings & documents
Working with MS Excel Registers (calculation, formulas, filters)
Assisting Contractors for preparation Check Sheets and Acts
Arrangement and coordination of Hydro tests performed by Contractors
Preparation and Updating Hydro test register
Updating and Coordination of Welders Qualification Register
Coordination of NDT (RT/PT) Percentages Register by procedure (specification)
Coordination of As-built drawings acceptance & redline changes in co-operation with Construction engineers
Checking the accuracy and correctness of document fillings
Auditing Contractors QC Doc (Procedures, Specifications, ITPs)
Taking part in Punch Lists Walk downs, Register Punch Lists,
Develop FMPG Excel QAQC Data Base
Prepare Documentation Packages for Final Handover to TCO Archive.
To organize weekly, monthly meetings with contractor QC representatives. |
|
Период работы | сентябрь 2010 — май 2013 (2 года 9 месяцев) |
Должность | TCODatoba | Компания | Mechanical QC Engineer | Обязанности | Quality check document correctness (Pr. No, Doc. No, DWG. No, revision, formatting etc) & make soft copy of each document
File latest revision of all project documents (hard copies) in accordance with the Project file index.
Working with the Live Tracking Database (inputting all AFC JPs with corresponding checklists and acts, updating project database, generation of different kinds of reports to track QC work process)
Compiling Indexes for Job Pack (on basis of design drawings)
Carry out Site Surveillance of Contractors Work Quality as identified on ITPs.
Working with TCO Specification and RoK Standards/Rules
Label all project files
Provide technical assistance to Designer, Construction, Commissioning and RA groups
Print, plot, scan drawings & documents
Working with MS Excel Registers (calculation, formulas, filters)
Assisting Contractors for preparation Check Sheets and Acts
Arrangement and coordination of Hydro tests performed by Contractors
Preparation and Updating Hydro test register
Updating and Coordination of Welders Qualification Register
Coordination of NDT (RT/PT) Percentages Register by procedure (specification)
Coordination of As-built drawings acceptance & redline changes in co-operation with Construction engineers
Checking the accuracy and correctness of document fillings
Auditing Contractors QC Doc (Procedures, Specifications, ITPs)
Taking part in Punch Lists Walk downs, Register Punch Lists,
Register Job Packs to Excel Data Base
Prepare Documentation Packages for Final Handover to CMS Group |
|
Период работы | январь 2010 — сентябрь 2010 (9 месяцев) |
Должность | QAQC department supervisor | Компания | KazCan | Обязанности | This position works with design documentation on mechanical, piping and civil construction projects, checking for compliance with TCO specifications and standards as well as with RoK regulatory requirements. Working with documentation approved for construction, develops indices of check sheets and acts required for technical and quality control. Maintains data base of required as-built documentation and monitors progress. Provides reports on current status of documentation submitted by contractor organizations for current projects.
Validates that contractors are applying appropriate Inspection & Test Plans and Quality Control Procedures as well as their compliance with TCO specifications and RoK standards.
Participates in special equipment (vessels, tanks, compressors, pumps, piping, valves etc.) testing on site. Compiles passports for special equipment in accordance with TCO and RoK regulation requirements. Ensures that all mechanical and piping installation and pre-commissioning work is in compliance with TCO design specifications and RoK standards. Participates in construction site walkdowns, ensuring defects are corrected. Prepares facility documentation for Technical and Working Commissions. Working on preparation and completion of all required documentation to obtain mechanical equipment acceptance by RoK regulatory agencies.
To organize weekly, monthly meetings with QC engineers and inspectors.
Provide technical assistance to Designer, Construction, Commissioning and RA groups.
Taking part in Punch Lists Walk downs, Register Punch Lists. |
|
Период работы | июль 2009 — январь 2010 (7 месяцев) |
Должность | Mechanical QC coordinator | Компания | Bateman Kazakhstan Oil & Gaz BV | Обязанности | Engineering provision, Acceptance act for load bearing critical structures.
To prepare welders and other specialists for work. Check up presence of their certificates.
Checking certificates for materials and for equipments, that used during the work implementation.
Review drawings, schemes, check list index, filling general and welding logs
Additional observe QC inspectors work, require daily report.
(Check of the welding (steel structure, piping, compaction testing, concrete pouring, quality of concretes), visually, to take x-ray tests and other kinds of tests. To prepare documents (check list, act, reports of laboratory).And on following works: painting, installation, isolation ect.) |
Образование
|
Образование | Высшее |
Окончание | 2009 год |
Учебное заведение | K.I. Satbayev university |
Специальность | Chemical polymers proccesing |
Дополнительная информация
| Иностранные языки | Английский (Разговорный), Русский (Свободный) | Водительские права | Категория B | Владение компьютером | Уверенный пользователь |
|
