Manager or Engineer

Имя

Nurlan

Контакты

Доступны бесплатно после регистрации или входа

Общая информация

Город проживания

Уральск

Заработная плата

По договоренности

График работы

Полный рабочий день / Сменный график / Подработка / Удаленная работа / Вахтовый метод работы

Образование

Высшее

Опыт работы

13 лет 7 месяцев

Пол

Мужской

Возраст

38 лет   (16 мая 1986)

Опыт работы

Период работы

октябрь 2013 — по настоящее время   (11 лет 2 месяца)

Должность

Lead Engineer / Acting Manager of QA QC Department (Tengiz)

Компания

Sicim S.p.A. engages at the national and international level in activities of design, procurement, construction and inst

Обязанности

• Development procedures / method statement / ITP according TCO requirements:
• A-ST-2049 Cathodic Protection Passport Specification
• CPM-DU-6004-TCO Cathodic Protection Test Stations for Pipelines
• CPM-DU-6021-TCO Cathodic Protection Commissioning Procedures
• CPM-DU-6022-TCO Sacrificial Anodes for Cathodic Protection of Internal Tank Surfaces
• P-ST-2120 Cathodic Protection Construction Specification
• X-ST-2003 Specification for Pipeline Liquid Joint Coating
• X-ST-2003 Specification for Pipeline Liquid Joint Coating
• COM-SU-4743-TCO External Coating
• COM-SU-4042-TCO Single & Dual Layer FBE Coatings for External PipelineCoatings
• COM-SU-4738-TCO Paint & Protective Coatings
• COM-SU-5191-TCO Coating Systems
• IRM-SU-1981-TCO Thermal Insulation for Hot Lines, Vessels and Exchangers
• X-000-X-PRO-0002 TCO Coating training manual
• X-000-X-PRO-0005 Tape wrap coating repairs
• FLD-FO-NP-4809 Installation of “Pikotek” Isolation Flange Kit on Gathering Lines
• Development PQT (Nap Gard, CANUSA).
• Third party audit from Intertek for Sicim S.p.A. (Implementation, Recertification and Maintenance of Quality Management System ISO-9001:2015).
• Second party (Audits from the client side and Audits on contracting organizations).
• First party (Internal Audits).
• Representing the company in front of clients and subcontractors (participate in meetings, negotiations and correspondences).
• Developing procedures and Inspection Test Plan.
• Control and prepare the necessary documentation.
• Organizing and conducting training courses in all QC areas.
• Monitoring of welders Rejection Rate.
• Qualification of WPS and Welders.
• Coordinator of NDT Laboratory.
• Coordinator of PWHT Team.
• Coordinate QA/QC Department (OM-"Operational Maintenance” Field Facilities: Tengiz, Korolev, Plant; Second Generation Project, Sour Gas Injection, Crude Tank Farm (KTL-1, KTL-2, SGP, SGI, CTF, Field)).
• Projects:
• PIPELINE REPAIRS
• FE (FACILITIES ENGINEERING).
• FMGP (FACILITIES MANAGEMENT PROJECT GROUP).
• TA 2014-2017 (TURNAROUND).
• SP (SPECIAL PROJECTS).
• SGE (SECOND GENERATION ENHANCEMENT).
• SGR (SEASONAL GAP REDUCTION PROJECT).
• PFU (PLANT FIREWATER UPGRADE PROJECT).
• WHU (WATER HANDLING UPGRADE).
• K3 WWU (K3 WASTE WATER UPGRADE).

Период работы

август 2016 — февраль 2017   (7 месяцев)

Должность

Manager of QA QC Department (Karabatan)

Компания

Sicim S.p.A. engages at the national and international level in activities of design, procurement, construction and inst

Обязанности

• Third party audit from NACEKS for KKS Sicim LLP (Implementation, Certification and Maintenance of ISO-9001 Quality Management System).
• Second party (Audits from the client side and Audits on contracting organizations).
• First party (Internal Audits).
• Projects:
• North Caspian Operating Company
• Maersk Oil Kazakhstan
• PSN - Kazstroy

Период работы

январь 2010 — октябрь 2013   (3 года 10 месяцев)

Должность

Welding & Mechanical and Piping Lead Inspector of QA QC Department

Компания

Bechtel - Enka Joint Venture (BEJV) “Senimdi Kurylys” LLP, Tengiz Oilfield

Обязанности

Control of all QAQC documentation & compilation of work packages for client.
• Completion documentation of executed work
• Inspection of Incoming Material (Pipes, Fittings and Valves) Control of traceability and surface damage
• Inspection FIT-UP of Tubing Isometric
• Visual Inspection of welds, writing daily welding report
• QC welding database, control of percentage rejection rates
• Control execution of the NDT (VT, RT, UT, MT, PT, and Hardness Test) and its sequence.
• Monitoring percentages of non-destructive testing in accordance with specifications and welding procedures
• Inspection of structural weld map, control of dimensions according to drawings
• Check P&ID drawings and latest isometric drawings
• Monitorring of above ground and underground welding operations
• Draw as built (for executive documentation)
• Hydrostatic and pneumatic test: completing of corresponding documentations, control according to SNiP and VSN standards
• Monitoring punch-list of incomplete work

Период работы

январь 2008 — январь 2010   (2 года 1 месяц)

Должность

Welding & Piping Supervisor

Компания

"IGS Sicim "LLP

Обязанности

Coordinate, organizing and controlling following:
• Piping fabrication (fit-up, welding, PWHT, coating).
• Piping site erection (installation, touch-up, heat tracing and insulation).
• Mechanical activates (flange alignment, Lange connection, bolt torqueing and valve installation).
• Steel structural fabrication (fit-up, welding, coating).
• Steel structural site erection (installation, bolt torqueing, touch-up).

Период работы

январь 2005 — январь 2008   (3 года 1 месяц)

Должность

Fitter

Компания

"Denholm-Zholdas "LLP

Обязанности

Locksmith gas rescuer

Образование

Образование

Высшее

Окончание

2014 год

Учебное заведение

"West Kazakhstan engineering humanitarian university " №10476

Специальность

Faculty: Operating of oil & gas № 0363896 Specialty: Ttechnician-technologist of oil & gas processing

Образование

Среднее специальное

Окончание

2005 год

Учебное заведение

"State municipal services "Agricultural college " №10736

Специальность

Faculty: Operating of oil & gas № 0363896 Specialty: Ttechnician-technologist of oil & gas processing

Дополнительная информация

Иностранные языки

Английский (Разговорный), Русский (Свободный)

Водительские права

Категории B, C

Владение компьютером

Продвинутый пользователь

Курсы и тренинги

• Certificate of successful completion of the final exam at the course (ISO-9001:2015) Lead auditor of Quality Management System (registered in the IRCA, N 17929)

Навыки и умения

• Currently working with SICIM S.p.A, Kazakhastan Lead Engineer/Acting Manager of QA/QC Department.
• Dynamic, detail-oriented & distinguished QA-QC Professional with a comprehensive experience and functional excellence in managing Quality, Material / Plant & Fabrication, Welding, Testing & Project site /field/shop /site Inspection & Destructive/Non-destructive Inspection and monitoring contractors.
• Expertise in execution of Piping, pipeline, pressure vessels, valves and structures. Man Power management, Quality management system. A strategic planner with expertise in implementing cost saving measures to achieve reduction in terms of Cost associated with projects/maintenance functions.
• Work on projects Pipeline Repairs by Cathodic Protection and Anticorrosive Coating, such as compassite (Furmanite FurmaCarbon, Techno Rap), Nap Gard, CANUSA, acquainted with the scientific collection of atlas defects and corrosion of metals from MI SWACO.
• Strong credentials in driving quality control initiatives to ensure strict conformance to defined quality parameters. Ability to conceptualize the sophisticated quality control measures in compliance to the specified standards while performing root-cause analysis to prevent any reoccurrences & defective issues.
• Well familiar with International Codes & Standards (ASME/ ANSI B31.3, B31.4, B31.8 ASME sec II, V, VIII, IX., API 1104, AWS D1.1) and ISO Certification & implementation. Awareness of the QA/QC parameters that are involved in the job such as batch certificates, test certificates according to the clients / consultants specification.
• Proficient procedures to facilitate robust Quality Management Systems, implementing and managing ISO 9001 implementation (QMS) for a large organization covering multiple locations.